The Lindsell Hoist

How do you handle those heavy lifting jobs, especially when there is no one around to help, or maybe the load is just too HEAVY.

Duratray have the solution:

the Lindsell Hoist, an Australian Designed and manufactured hydraulic crane.

This crane bolts in the Corner of either your Steel or Aluminium tray, and is powered by an electric/hydraulic power pack which uses the vehicles battery.

There are various models available to suit a variety of lifting applications, eg generators, compressors, welders, 44 gallon drums and many others.

Stores against tray headboard when not in use

Model - L-RLP (12 or 24v)

Hydraulic lift, Manual slew and extension

Lift capacity
700kg at 0.9 metres
400kg at 1.6 metres
250kg at 2.5 metres (manual extension)

Hydraulic lift, manual extension, two way ratchet locking slew.(see below )
Two button radio remote control
Drop down stabilizer leg
Lifts to 2400mm above the tray and lowers to approximately 500mm below the tray
built in relief valve (to avoid overloading)
Velocity-fuse (hose burst) for safety of hydraulic cylinder
Flow control valve (to enable the operator to adjust the speed at which the boom is raised & lowered)

Ratchet Locking Slew

Locks slew from either direction, or free slew

This world first system enables the operator to safely work the boom in a sideways motion, without risk of a load moving back towards the operator.

JRT Model - Full Hydraulic operation

Manual Drop drop down leg
(standard on all models)

Lift capacity
700kg at 0.9 metres
400kg at 1.6 metres
250kg at 2.5 metres

1 TONNE Model

Lift capacity
1000kg at 0.9 metres
500kg at 1.6 metres
300kg at 2.5 metres
150kg at 3.2 metres (manual extension)

Rear mounting of Lindsell hoists available on steel trays only

Model - JRT (12 or 24V) - Full Hydraulic

Hydraulic slew (300 А)
Hydraulic extension
Hydraulic Lift
Lifts to 2400mm above the tray and lowers to approximately 500mm below the tray
Six button radio remote control
Drop down stabilizer leg
built in relief valve (to avoid overloading)
Velocity-fuse (hose burst) for safety of hydraulic cylinder

Lindsell Hoist Movement Range and Control

Lindsell hoist movement range is impressive, particularly when mounted in the rear corner of your tray. With a sideways slew of approximately 300°, a reach of 2.5m, lifting height of 2.4 metres above the tray and lowering 50cm below the tray all with the ease of a radio remote control, the Lindsell Hoist is able to cater to all of your lifting requirements.

More Options

Lyco Loader
300kg side or tail

Loading Ramps

Electric-Hydraulic Tippers

Other Accessories

Duratray Transport Equipment

4 Industry Place Capalaba Qld 4157

T:+61 (07) 3899 7000
F:+61 (07) 3245 6768

An Australian Family
Owned Company

australian-made custom alloy and steel trays and accessories for utes and trucks

_{©2009 Duratray Transport Equipment No images or content may be reproduced without prior permission from Duratray Transport Equipment

Trademarks of other manufacturers are used for vehicle identity purposes and do not imply any endorsement by these manufacturers.}